Rockwell Automation Allen-Bradley PowerFlex 6000, Руководство пользователя

Страница: 141 / 154

Rockwell Automation Publication 6000-UM002G-EN-P - August 2022 141
Appendix E Spare Parts Storage
Energize the DB Board only
1. Connect the multichannel variable DC source with current limiting
functionality to DC input terminals P1 and P2 of the DB Board, according
to
Table 16 .
2. Use 1.3 mm
2
(16 AWG) wire to connect the devices.
Energize the DT Board
1. Plug the DT board into its slot as shown in Figure 72 .
2. Connect the multichannel variable DC source with current limiting
functionality to DC input terminals P1 and P2 of the DB Board, according
to
Table 16 .
3. Use 1.3 mm
2
(16 AWG) wire to connect the devices.
Energize the AT Board
1. Plug the DT and AT boards into their respective slots as shown in
Figure 72 .
2. Connect the multichannel variable DC source with current limiting
functionality to DC input terminals P1 and P2 of the DB Board, according
to
Table 16 .
3. Use 1.3 mm
2
(16 AWG) wire to connect the devices.
Energize the PWM Board
1. Plug the DT and PWM boards into their respective slots as shown in
Figure 72 .
2. Connect the multichannel variable DC source with current limiting
functionality to DC input terminals P1 and P2 of the DB Board, according
to
Table 16 .
3. Use 1.3 mm
2
(16 AWG) wire to connect the devices.
The CPU Board is not required to perform the engergizing procedure. You
can leave the CPU Board slot empty.
WARNING: Do not apply any voltage until the DT Board is plugged into the
DB Board.
WARNING: Do not apply any voltage until the DT and AT boards are
plugged into the DB Board.
WARNING: Do not apply any voltage until the DT and PWM boards are
plugged into the DB Board.
The CPU Board is not required to perform the engergizing procedure. You
can leave the CPU Board slot empty.