RocketFish RF-HTN104 Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 73

background image

72

FCC

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide
reasonable protection against harmful interference in a residential installation.  This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in
a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. For
operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.

«
...
70
71
72
73
»

Содержание RF-HTN104










































































Отзывы:

Нет отзывов

Похожие инструкции для RF-HTN104

Бренд: Paradyne Страницы: 2

3CRWX385075A - Wireless LAN Managed Access Point...

Бренд: 3Com Страницы: 4

Бренд: MOB Страницы: 19

Бренд: D-Link Страницы: 16

RUGGEDCOM WIN5137

Бренд: Siemens Страницы: 38

RUGGEDCOM WIN5214

Бренд: Siemens Страницы: 42

Бренд: Siemens Страницы: 54

Бренд: Siemens Страницы: 92

6GK5748-1GY01-0AA0

Бренд: Siemens Страницы: 91

SCALANCE W744-1

Бренд: Siemens Страницы: 99

SCALANCE W1750D UI

Бренд: Siemens Страницы: 570

Бренд: u-blox Страницы: 47

Бренд: Comcast Страницы: 51

Бренд: Redpine Signals Страницы: 146

Бренд: Audio Technica Страницы: 30

Бренд: Jabra Страницы: 60

Бренд: Hills Страницы: 12

Бренд: HPE Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды