Robusta TROPICO, Инструкция по эксплуатации

Страница: 13 / 22

13
EN
Before Using for the First Time
Please remove all parts from the packaging and read
through the manual thoroughly before using for the first
time. Ensure all parts indicated in the above parts list
have been included in the giftbox. Remove all parts and
wash all bowls and attachments in warm soapy water. Dry
thoroughly after use and you are ready to start using your
Stainless Steel Fruit Juice Extractor.
1.Place the main body on a clean, level dry surface.
2.Place juicer bowl onto the main body.
NOTE: Please note the Juice Extractor has an
in-built safety mechanism that will prevent the
product working unless parts have been assem-
bled correctly and locked in (Juicer Lid and Safety
Locking Arm).
3.Insert the stainless steel mesh filter into the juicer bowl,
sitting firmly in place over the motor base.
NOTE: The mesh filter will be attached to the juicer
bowl in the packaging. You will need to remove to
wash prior to using for the first time.
CAUTION: The centre of the stainless steel mesh
filter contains small sharp blades to process fruit
and vegetables. Do NOT touch the blades when
handling to prevent cuts and injuries.
4.Place the juicer lid and feeding chute onto the juicer
bowl.
5. Place the juice pusher into the feeding chute.
6.Raise the safety locking arm and lock into the 2 grooves
on either side of the juicer bowl. The safety locking arm
should now be in a vertical position and should be locked
into place on top of the juicer bowl.
NOTE: If the safety locking arm is not locked into
place correctly, then the Juice Extractor will not
operate.
7.Place the pulp container under the pulp residue
chute.
8.Place the juice jug under the juice spout.
Assembly