Road Angel Trac-it, Руководство пользователя

Страница: 12 / 44

12
Step 2
Remove the Trac‐It information card form the box (located under the lid) and keep it to hand, as you
will need it at a later stage. After the install is complete, please ensure this card is given to the
customer for them to keep in a safe place, as it explains how to arm and disarm their Trac‐It unit, as
well as what to do if they get an alert. It also has the Serial Number and IMEI number required for
registration.
Step 3
1. Install wiring loom
2. Connect the Live (red) wire to a live power feed
3. Connect the Earth (black) wire to an Earth source
4. Connect the Ignition (blue) wire to an ignition feed. Please note that you do not have to
connect this wire however it is recommended as it will enable Trac‐It to be armed and disarmed
by using the ignition. Otherwise you will have to arm and disarm Trac‐It by sending an SMS text
message from your mobile phone or from the Trac‐It website. You also need to have the
ignition feed connected if you wish to use see breadcrumb trails of where you’ve been – as part
of the journey tracking feature.