Road Angel Trac-it, Руководство пользователя

Страница: 10 / 44

10
Advice on fitting Trac‐It
Please take your time in positioning and securing the unit, as this is vital to ensure its proper
operation. It is up to the installer of the Trac‐It unit to position the unit where they see fit, however in
order for the unit to obtain maximum GPS signal please
do not position the unit under any metal
objects (such as the fuel tank). We cannot suggest the most appropriate location as this varies greatly
between different vehicles, caravans and leisure equipment, and our recommendations may also give
your Trac‐It's position away to potential thieves.
The Trac‐It unit should be secured with the top facing as much to the sky as is possible, and can be
fastened with cable ties or Velcro pads ‐ once again this is up to the individual owner. Please also
ensure that you have secured the wires / wiring loom correctly. You can use cable ties and/or Velcro
fasteners (as provided in the box), however if you do use the Velcro fasteners please make sure the
contact surface is clean and free from dust.
The loom provided in the box is two meters long, thus giving you enough flexibility to fit the unit
where you chose. Please ensure however that you connect the wires to the appropriate feeds.
Please note: Trac‐It must be fitted by a professional automotive electrician with a Thatcham or
manufacturers accreditation. The following instructions are to guide qualified installers in fitting
the Trac‐It unit, otherwise the Warranty will be invalid.