RMG TME400-VC, Руководство по эксплуатации

Страница: 62 / 112

4 Operation
MANUAL TME400-VCF · EN04 · 2019 March 26th
56
Example:
Current mode F02 can be deactivated or activated on various settings. This is ad-
justed as follows:
0 Off (default)
1 No errors
2 Error 3.5 mA
3 Error 21.8 mA
4 0 - 20mA
If F02 = "0" is selected for the coordinate, the current output is switched off.
Note
With some coordinates, a number is assigned fixed values.
Instead of an adjustment with 0, 1, ..., these numerical values are shown di-
rectly. Changes are possible with the arrows and , then the next
higher or lower value is shown and can be adopted with .
Example:
Digital output 2 pulse width (coordinate A22) can adjust the pulse width to 3 different
widths. The following values can be directly as an assignment:
20 ms
125 ms
250 ms