RMG TERZ 94, Руководство по эксплуатации

Страница: 61 / 66

Annex
Operating Instructions for the TERZ 94 Electronic Turbine Meter
59
Matrix of the TERZ 94 / 94-S
Terz94 Terz94 Terz94-S Terz94-S
Coordinate Specification 1 Channel 2 Channel 1 Channel 2 Channel
A01 Main Totalizer Vm X X X X
A02 Flow rate (Qm) X X X X
A03 Disturbing quantity totalizer NO X NO X
A04 Start / Stop totalizer X NO X NO
A05 Resettable totalizer
X
NO
X
NO
A06 Meter factor
X X X X
A07 Pulse scaler
X X X X
A08 Configuration
X X X X
A09 Error
X X X X
A10 Operating mode Pulse X from X:Y NO
X
NO
X
A11 Operating mode Pulse Y from X:Y NO X NO X
B01 Serial number
X X X X
C01 Current output
NO NO
X X
C02 Flow rate at 4 mA
NO NO
X X
C03 Flow rate at 20 mA
NO NO
X X
C04 Calibration current
NO NO
X X
C05 Current output mode
NO NO X X
C06 Correction factor – offset
NO NO X X
C07 Correction factor – Rise
NO NO X X
C08 Damping display / current output
NO NO X X
Z01 Number of digit positions following a
Decimal point
NO NO NO NO
Z02 Factor
NO NO NO NO
Z03 Divisor
NO NO NO NO
Z04 Direction of rotation for ENCO
NO NO NO NO
Z05 Totalizer
NO NO NO NO
Z06 Frequency
X X X X
Z07 Maximum flow value
0 0 0 0
Z08 Frequency-mode
0 0 0 0
Z09 Error state
0 0 0 0
Z10 Number of pulses
X X X X
Z11 Version number X X X X
Not available
NO
Available X
Available in service mode 0
In case only a part of the matrix is displayed. It any depends on the operating mode,
which fields are displayed. Fields, which have no function in the selected operating