Using the Single Module Data Viewer Software • 49
Deleting Data
You can delete an instrument, bump test data, or calibration data in the
data view window. The delete function is password protected to avoid
accidental deletion of instruments or data. To delete an instrument or
data, perform the following:
1. Find the item you wish to delete and right click it. A window will
appear that says “Delete(D) Change Password(C)”.
2. Click on “Delete(D)”. A password entry window will appear.
3. Enter the password and click OK. The default password is
“ABCDE” and is case sensitive. A confirmation window will appear.
4. Click OK to complete the deletion of the selected item.
Changing the Password
The default password is “ABCDE” and is case sensitive. You can change
the password in the data view window. To change the password perform
the following:
1. Right click in the upper right or upper left part of the data view
window. A window will appear that says “Delete(D) Change
Password(C)”.
2. Click on “Change Password(C)”. A window will appear prompting
you for the current password.
3. Enter the current password and click the Current Password
button. A window will appear prompting you for the new password.
4. Enter the new password and click the New Password button. A
confirmation window will appear prompting you for the new
password again.
5. Enter the new password again and click the Confirm New
Password button. A window will appear indicating that the
password has been changed.
6. Click OK to complete the password update.
