18 • Setting the Bump Test and Calibration Parameters
2. Press and release the EDIT ENTER button. The GX-2009 will
display the following screen.
3. Press and release the BUMP
▼
button. The GX-2009 will display
the following screens alternating between the four bump test
parameters and their settings.
4. If you wish to cancel setting the bump test parameters or were just
viewing the parameters to confirm their values, press and release
the BUMP
▼
button to return to the TRANSMIT screen.
To continue and change parameters, press and release the EDIT
ENTER button. The first bump test parameter, air sample time, will
be shown on the GX-2009 display.
BUMP/CAL
A ir G A S
BUMP
c H E c A L
3 0 6 0
5 0 o F F
BUMP
3 0
AIR-IN
