RKC INSTRUMENT PG500, Инструкция по эксплуатации системы связи

Страница: 59 / 70

5. COMMUNICATION DATA LIST
IMR02F04-E1
53

Gain setting and linearizing type
(Only our pressure sensor CZ-100P/CZ-200P)
Set the rated output value (mV/V) and linearizing type symbol to Gain setting (RKC communication: GA,
Modbus: 00FBH) and linearizing type (RKC communication: LI, Modbus: 0100H) engraved on the rated
nameplate attached to the pressure sensor housing.

Example of the rated nameplate
Linearizing type symbol table
Set value
Linearizing
type symbol
Set value
Linearizing
type symbol
Set value
Linearizing
type symbol
0 No symbol 7 J 14 S
1 C 8 K 15 T
2 D 9 L 16 U
3 E 10 M 17 V
4 F 11 P 18 W
5 G 12 Q 19 X
6 H 13 R 20 Y
The rated output value (mV/V) of the CZ-100P/CZ-200P is when the cable is at a length of
5 m. When the cable is extended or a cable of a different manufacturer is used, the gain value
must be corrected and changed. For details, refer to the
CZ-100P/PCT-300 Resin Pressure
Measuring System Instruction Manual (IM100CZ04-E

) or CZ-200P Instruction
Manual (IM100CZ08-E

) .
PRESSURE SENSOR
PRESSURE RANGE
0-20
CZ-100P-HB-SNE
TYPE
MPa
RATED OUTPUT
1.234 C mV/V
No.
03E2420
DATE
0305
RKC INSTRUMENT INC. TOKYO
1.234 C
linearizing type symbol
Set it to linearizing type (RKC
communication: LI, Modbus S: 0100H) by
refer to the
linearizing type symbol table .

Set the “ 1 .”
Rated output value
Set it to Gain setting (RKC communication:
GA, Modbus: 00FBH).

Set the “ 1.234 .”