RKC INSTRUMENT PG500, Инструкция по эксплуатации системы связи

Страница: 3 / 70

IMR02F04-E1
i-1
Thank you for purchasing this RKC product. In order to achieve maximum performance and ensure proper
operation of your new instrument, carefully read all the instructions in this manual. Please place the manual
in a convenient location for easy reference.
SYMBOLS
: This mark indicates that all precautions should be taken for safe usage.
: This mark indicates important information on installation, handling and operating
procedures.
: This mark indicates supplemental information on installation, handling and
operating
procedures.
: This mark indicates where additional information may be located.

An external protection device must be installed if failure of this instrument
could result in damage to the instrument, equipment or injury to personnel.

All wiring must be completed before power is turned on to prevent electric
shock, fire or damage to instrument and equipment.

This instrument must be used in accordance with the specifications to
prevent fire or damage to instrument and equipment.

This instrument is not intended for use in locations subject to flammable or
explosive gases.

Do not touch high-voltage connections such as power supply terminals, etc.
to avoid electric shock.

RKC is not responsible if this instrument is repaired, modified or
disassembled by other than factory-approved personnel. Malfunction can
occur and warranty is void under these conditions.
: This mark indicates precautions that must be taken if there is danger of electric
shock, fire, etc., which could result in loss of life or injury.
: This mark indicates that if these precautions and operating procedures are not taken,
damage to the instrument may result.
WARNING
!
CAUTION
WARNING
!