RKC INSTRUMENT PG500, Инструкция по эксплуатации системы связи

Страница: 20 / 70

2. HOST COMMUNICATION
IMR02F04-E1
14
7. Set the Device address.
Press the

key several times at input type
until device address is displayed.
Device address
InP
Add
Input type
SET
(Several times)
Press the

key to set the device address.
Setting range: 0 to 99 (RKC communication)
1 to 99 (Modbus)
As an example, factory set value “0” is set.
Add 000 0
Device address
MONI
High-lighted digit
Device address 0
8. Set the Communication speed.
Press the

key. The display goes to the
communication speed.
Communication
speed
000 0
bPS
SET
Store
Press the

key to set the communication
speed.
Setting range: 1.2: 1200 bps
2.4: 2400 bps
4.8: 4800 bps
9.6: 9600 bps
19.2: 19200 bps
38.4: 38400 bps
As an example, “38.4 (38400 bps)” is set.
bPS 9. 6
Communication
speed
MONI
38. 4
High-lighted digit
(Twice)
High-lighted digit
38.4: 38400 bps
9. Set the Data bit configuration.
Press the

key. The display goes to the data
bit configuration.
Data bit
configuration
38. 4 bIT
SET
Store
Press the

key to set the data bit configuration.
Setting range:
Refer to Data bit configuration table
(P. 11) .
As an example, factory set value “8n1 (Data
8-bit, Parity bit without, Stop 1-bit)” is set.
bIT 8n 1
Data bit
configuration
MONI
8n1:
Data 8-bit
Parity bit without
Stop 1-bit
High-lighted digit