NOTE: At front and back, edge of G-1 gutter
profile lines up flush with edge of F-7 corner profile.
2.5A
2.5B
Working from inside, place G-1 and G-2 gutter profiles, fitting top edge of W-1 panels into
channels of gutters. Place one short G-1 gutter
profile at each end and the four longer G-2
gutter profiles in the center. Seams are
centered to bolt tracks in F-1 profiles.
2.6A
2.6B
S-2A
S-2B
2
2
Prepare two G-1 gutter profiles by sliding four set screws into bottom bolt track.
Hand tighten each end set screw to hold in place.
Prepare three G-2 gutter profile with six set screws
and one G-2 gutter profile with five set screws.
Slide set screws into bottom bolt track.
Hand tighten end set screw
to hold in place.
Place one set screw on the inside bolt track of the gutter
at each end. Hand tighten both set screws to hold in place.
G-1
G-1
G-2
G-2
G-2
G-2
S-2A
S-2B
31
31
QTY
Profile
2
G-1
G-2
4
25½”
48½”
NOTE: VIEW FROM INSIDE.
NOTE: VIEWS FROM INSIDE.
W-1
W-1
W-1
W-1
F-7
F-1
F-1
G-1
G-2
G-1
F-7
WWW.RSIWW.COM
12 of 46
G-1
W-1
F-7
G-1
W-1
F-7
