Install Doors
From outside, prepare to install right and left door tracks.
The door tracks are secured with the set screws in
F-7 profiles on each side and the two set screws
in F-5 profile. Remove two bolts from center
B-2 connector on F-5 profile. Slide set
screws to inside edge of hole.
Loosen set screw in left F-7 profile and position to line up holes in D-1L as shown.
Loosely secure with bolts.
Loosen set screw in right F-7 profile and position to line up holes in D-1R
as shown. Loosely secure with bolts.
10.1A
10.1B
10.1C
QTY
Profile
D-1L
1
D-1R
1
37½”
B-2
F-5
F-4
NOTE: VIEW FROM OUTSIDE.
NOTE: ALL VIEWS FROM OUTSIDE.
NOTE: ALL VIEWS FROM OUTSIDE.
D-1R
D-1L
D-1L
F-5
F-7
D-1R
F-7
F-5
IMPORTANT: Position D-1L and D-1R door
tracks with lip on the bottom when installed.
WWW.RSIWW.COM
43 of 46
NOTE: Have the hex shaped indent facing up. Screw in until it is flush with bottom of nut so
it slides easily into bolt tracks. After inserting into bolt track, screw in until it holds in place.
Make certain the pieces are in the correct positions before assembling.
Carefully follow the order of assembly to ensure an easy installation.
Wear proper safety gear including work shoes, gloves and goggles.
Prepare needed set screws as shown in step 1.1A
B-2
B-3
B-3
F-5
F-1
F-1
F-7
F-7
F-4
