Riverbed SteelHead 5080, Руководство по установке и настройке

Страница: 45 / 94

Installing and Configuring the SteelHead | 45
Configuring out-of-path SteelHeads
3. Choose Optimization > Network Services: In-Path Rules.
Figure 3-13. In-Path Rules page
4. Under In-Path Rules, click Add a New In-Path Rule to display the in-path rule configuration options.
5. For Type, select Fixed-Target from the drop-down list.
6. For Target Appliance IP Address, specify the IP address and port number for the peer SteelHead.
Use one of these formats:
xxx.xxx.xxx.xxx/xx (IPv4)
x:x:x::x/xxx (IPv6)
The IP address must be the primary Port IP address on the target SteelHead. The default port is
7810.
Note: If you are not optimizing all ports in your out-of-path deployment and you want to optimize MAPI Exchange,
you must specify the MAPI end-point port ( 135 ), the SteelHead port used for Exchange traffic ( 7830 ), and the
SteelHead port used for Exchange directory NSPI traffic ( 7840 ). For detailed information about MAPI Exchange
settings, see the SteelHead User Guide .