Riverbed SteelHead 5080, Руководство по установке и настройке

Страница: 13 / 94

Riverbed Software Licenses, Upgrades, and Image Signing | 13
Software upgrades and image signing
To install a license using the CLI
1. Connect to the CLI of the appliance and enter configuration mode.
2. At the system prompt, enter the following commands:
license install <license-key>
write memory
Note: The command for installing licenses under the Riverbed Common Licensing Management Framework
(CLMF) is license clmf install <license-key> .
To install a license using the Management Console
1. Connect to the Management Console of the appliance.
2. Display the Licenses page.
3. Copy and paste the license key provided by the Riverbed Licensing Portal into the text box.
Software upgrades and image signing
The Software Upgrade page of the management console enables you to perform these software
management activities:
• Enable and disable software image signing.
• View current and backup software versions.
• Switch from the currently running software version to the backup software version.
• Install a new software version.
• Schedule a software upgrade.
• View a history of previously installed software versions.
For most products, the Software Upgrade page is in the Administration section of the Management
Console.
Managing software image signing certificates
Riverbed software images are now digitally signed, ensuring the integrity and authenticity of the image.
Verifying an image is performed by comparing a public key, or image signing certificate, with the image
signature. For details, including a copy of the public key and intermediate certificate, go to Knowledge
Base article
S33657 .
Note: Image verification is enabled by default. We strongly recommend that it remain enabled at all times. Disable
this feature only when absolutely necessary.