ritm Contact GSM-9?, Руководство по эксплуатации

Страница: 72 / 93

www.ritm.ru
72 of 93
Operating Manual. Contact GSM-9N /А/М
Output terminals
This section (fig. 29) is intended for configuring panel outputs (fig. 29). The
panel has two open collector type outputs to connect actuation devices,
such as sirens and light displays.
OK1 output
OK1 output is designed to connect actuation devices (light displays,
indicators). Connected actuation device:
• For Contact GSM-9N - duplicates the condition of the areas,
assigned to the "Exit" button (in the section "Keypads");
• For Contact GSM-9A/M - duplicates the condition of the
selected areas (parameter Indication of area status );
OK2 output
OK1 output is designed to connect the siren. Operation mode of the siren
is configured in the section "Areas Configuration" (parameter Turn on the
siren is case of alarm ).
Siren running time
Set connected siren running time (sec), 30 sec is default.
Turning off the siren with “CANCEL” button on the keypad
Using “Cancel” button to turn off the siren.
Outputs test mode
Click the
Switch on
link to turn both of outputs into the manual control
mode. The mode is intended for testing outputs.
i
Note that to exit from the test mode requires a restart of the panel.