ritm Contact GSM-9?, Руководство по эксплуатации

Страница: 39 / 93

www.ritm.ru
39 of 93
Operating Manual. Contact GSM-9N /А/М
Generate "Battery malfunction" event
Check this box if you want to receive information when the battery
is suspected of malfunction (only using the CPW terminal).
Event 309.1 — Battery malfunction will be generated when the
panel switches from main power (having worked from the main
power for longer then 3 hours) to backup power while the
backup power has dropped down to 11V over 15 minutes.
Generate "Low Battery" event
Check this box if you want to receive information when
the battery is low (only using the CPW terminal).
Event
302.1 – Low battery
is generated when external power is
off and a backup power supply voltage drops down to 11V.
i
Note, in 3 hours after power supply the 302.3
– Rcv: Battery discharge” is generated.
Generate the events "220V failure/recovery"
Set the period over which the panel registers events:
• 301.1 — 220V malfunction .
• "Recovery: 220V malfunction .
When using the CPW terminal the events are generated after
external power off/on in period specified at configuration
stage. In other words, for the specified period, a backup power
supply should be used to generate the event. If the power
is restored earlier, the event will not be registered.
Generate “Reboot” event
Activate to get details on panel rebooting. The
305.1: System Reboot event is generated.
!
The panel reboots upon turning on, device functional
software update and exiting the configuration
software while working over the CSD channel.