ritm Contact GSM-9?, Руководство по эксплуатации

Страница: 69 / 93

www.ritm.ru
69 of 93
Operating Manual. Contact GSM-9N /А/М
Working with smart readers
The panel works with the intelligent RFID key readers developed by
“R&D Company “Ritm” LLC.
With an intelligent reader, you can use one key to arm / disarm two
different types of areas:
• Areas of the "Perimeter" type are specified using the "Areas
which intelligent reader refers as perimeter" parameter,
and controlled by a double application of the key;
• All areas assigned to this key are specified when the key
is added and controlled by its one-time application.
i
Note that if you connect at least one smart reader to the panel,
all other connected readers start working according to the logic of
smart one (they will support the double application of the key).
i
You cannot assign the following types of areas to a key:
• Areas such as "24";
•
"Gap" areas (it highlighted in gray on the «Areas configuration»
page) – the areas for which no hardwired zone is assigned.
When assigning "the fire area" to the key, then other
types of areas cannot be assigned to such.
! Note that the “Perimeter” type areas assigned in
this section belongs to the reader only and are not
relevant for the areas assigned to the “Perimeter”
button on the keyboard (for Contact GSM-9N ).