ritm Contact GSM-9?, Руководство по эксплуатации

Страница: 14 / 93

www.ritm.ru
14 of 93
Operating Manual. Contact GSM-9N /А/М
Part Designation
XT1 220V power supply connector
+1-; +2-; +3- Connectors for hardwired zones connection
ОК1, ОК2, +12V
Connectors for external actuation devices connection
(siren, visual indicator etc.). Maximum load current — 300 mA.
The ОК1, ОК2 terminals are negative and the
+12V terminal is positive for the device.
+12V, GND
Terminals for power supply of security sensors (+12 V constant
voltage is applied to the connector when the control panel is on)
GND, BAT+
Lead-acid battery connector The GND terminal is negative
and the BAT+ terminal is positive for the battery.
TM, LED, GND
Terminals for Touch Memory reader connection:
• TM: output (positive terminal) for
connecting red Touch Memory wire;
• LED — an output (positive terminal) for connecting
orange wire of the Touch Memory indicator
• GND — a common terminal for connecting
black and yellow Touch Memory wire
SA1
Enclosure break-in or supporting surface
(i.e., wall) tear-off tamper of control panel
PROG Configuration cable connector
SIM1, SIM2 SIM card slots
XS1 GSM antenna connector
TM Connector for Touch Memory reader connection using a 4-pin cable
INDIC Connector for indication board connection (on the enclosure)