ritm Contact GSM-9?, Руководство по эксплуатации

Страница: 70 / 93

www.ritm.ru
70 of 93
Operating Manual. Contact GSM-9N /А/М
An indication of the smart reader, when it's connected to the
Contact GSM-9N/A/M
panel, is shown in the table below:
Indicator State Value
Green
On All areas are disarmed
Blinking Countdown delay for «input/output»
Off At least one of security areas is armed
Yellow
On All sections of the perimeter get armed
Blinking No connection to the panel
Off At least one of security areas is not armed
Red
On All sections get armed
Blinking Alarm in any area (incl. fire protection areas and «24»)
Off At least one of security areas is not armed
i
The alternating flashing of yellow and red indicators (no more
than 5 seconds) means the waiting of panel to apply the key again.
Thus, with the configuration shown in Figure 28,
the logic of the operation will be as follows:
With the
one-time apply of key allow you to put the
areas 1-6 under guard (if all sections are disarmed)
or disarm any section under protection;
With the
double-apply of key the sections (1-3) will be armed.
Note that to manage the perimeter sections,
they must be controlled by this key (specify them
with checkmarks when adding a key).