![background image](http://html1.mh-extra.com/html/riso/v8000-series/v8000-series_technical-manual_1464434277.webp)
[16 - 14]
CHAPTER 16. PANEL MESSAGES
DETAILED LIST OF PANEL MESSAGES
Error type
T33 [2nd mas ter dis posal compres sion motor lock]
Reset method
Press the [OK] key or the Reset button
→
recovery operation (HP res etting), or s witch on power
once again.
Error point
Error conditions
301
Master dis pos al HP s ensor does not go ON within 7 s when the master compress ion plate
returns.
304
Master dis pos al upper limit sens or does not go ON within 7 s when the master compress ion
plate performs compres sion.
305
Overload current detected when the master compress ion plate returns. (It is not monitored
between 300ms ec after motor ON)
306
Both the mas ter compression limit s ens or and master compres sion HP s ensor are ON at the
start of the operation.
Error type
T34 [2nd inner pressure error]
Reset method
Press the [OK] key or the Reset button
→
recovery operation (inner pres sure roller HP resetting).
Error point
Error conditions
519
Inner pressure detection sensor does not switch OFF during the inner pressure roller raise
operation, even when retried.
520
Inner pressure detection sensor does not go ON during inner press ure roller lower operation,
even when retried.
521
Inner pressure detection sensor does not go ON during idling (when power is s witched on).
Error type
T35 [2nd print drum lock error]
Reset method
Press the [OK] key or the Reset button
→
Recovery operation (lock release), or switch on power
once again.
Error point
Error conditions
531
Print drum lock cam sens or does not go ON within the preset interval during the print drum
locking operation.
532
Print drum lock position sensor does not go ON within the preset interval during the print drum
locking operation.
533
Print drum lock position sensor does not switch OFF within the pres et interval during the print
drum releasing operation.
534
Print drum cam s ensor does not switch OFF within the pres et interval during the print drum
releasing operation.
Error type
T36 [2nd inking motor lock]
Reset method
Press the [OK] key or the Reset button, or switch on power once again.
Error point
Error conditions
539
Overload current detection. (It is not monitored between 300msec after motor ON)
Panel dis play
T33-***
!!System Error!!
Press Reset Key.
If Recovery has Failed, Call Service
Panel dis play
T34-***
!!System Error!!
Press Reset Key.
If Recovery has Failed, Call Service
Panel dis play
T35-***
!!System Error!!
Press Reset Key.
If Recovery has Failed, Call Service
Panel dis play
T36-***
!!System Error!!
Press Reset Key.
If Recovery has Failed, Call Service
Содержание V8000 Series
