Riso V8000 Series, Техническое руководство, Страница: 275 / 362

[16 - 12]
CHAPTER 16. PANEL MESSAGES
DETAILED LIST OF PANEL MESSAGES
Error type T25 [No ROSE battery]
Res et method Replace battery.
Error point Error conditions
007 No ROSE backup battery.(The voltage of battery is under 2.3V)
Error type T27 [Master m aking shifting m otor lock]
Res et method To be reset by Technician only
Error point Error conditions
221
Mas ter making unit position sens or 1 does not go ON within 7 s while the unit is m oving
toward the 1st print drum .
222
Mas ter making unit position sens or 1 does not go OFF within 2 s while the unit is m oving
toward the 2nd print drum.
223
Mas ter making unit position sens or 2 does not go ON within 7 s while the unit is m oving
toward the 1s t print drum.
224
Mas ter making unit position sens or 2 does not go OFF within 2 s while the unit is m oving
toward the 2nd print drum.
225 Mas ter making unit position sens ors 1 and 2 are both ON at s tart of operation.
226
The clamp slide unit is not res etting position at start of mas ter making shifting m otor
rotation.(Both clamp slide HP s ens or and slide return sensor are OFF)
Error type T28 [2nd clam p s lide m otor lock]
Panel display
T28-***
!!System Error!!
Call Service
Res et method To be reset by Technician only
Error point Error conditions
508
Clamp slide HP sensor does not s witch from OFF
→
ON and the slide return sensor does
not s witch OFF within 2 s during the clam p s lide HP res etting (forward) operation.
509
Clamp slide HP sensor does not s witch from ON
→
OFF within 1 s during the clamp s lide
HP resetting (forward) operation.
510
Clamp slide HP sensor does not s witch from OFF
→
ON and the slide return sensor does
not go ON within 2 s during the clamp slide res etting operation.
511
Clamp slide HP sensor does not s witch from ON
→
OFF within 1 s during the clamp s lide
res etting operation.
512 Overload current detection (It is not monitored between 100m s after m otor ON)
513
The m as ter-m aking unit is in the incorrect position when starting pos itioning the clam p unit
at the forth position.
562
The m achine type comm unication error is occurred when positioning the clamp unit at the
forth pos ition.
563
The m achine type comm unication error is occurred when positioning the clamp unit at the
back position.
Panel display
T25-***
!!System Error!!
Press Reset Key.
If Recovery has Failed, Call Service
Panel display
T27-***
!!System Error!!
Press Reset Key.
If Recovery has Failed, Call Service