Riso V8000 Series, Техническое руководство, Страница: 312 / 362

[17 - 13]
CHAPTER 17. TEST MODE
MASTER MAKING TEST MODE
No. 1/2 Switch
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Default:
Description
Setting
Range:
Default:
Description
Setting
Range:
Default:
Selection of whether new master making unit or old master making unit.
0 (Inactive)
1 (Active)
1 (Active)
Image Size Control Shift Switch (after software version 2.00)
0 (old master making unit)
1 (new master making unit)
1 (new master making unit)
Data settings
Loading Motor Finish Point Adj
Adjustment of the loading motor reverse rotation stop timing in relation to the
print drum angle. (Top clamp position-A standard angle).
Loading Motor Start Point Adj
Adjustment of the loading motor reverse rotation start timing in relation to the
print drum angle. (Top clamp position-A standard angle).
-31 to +30 (-31 degree to +30 degree)
1 (1degree)
0 (0 degree)
l If the adjustment is set to +30 degrees, and if test mode No.297 is set to 25
degrees, the print drum angle for the loading motor start and stop angles
becomes equal. In that case, the loading motor will not rotate.
299
296
297
298 Loading Motor Action Control
Activating or deactivating the loading motor start and stop movement as set by
test modes No.296 and 297.
-28 to +30 (-28 degree to +30 degree)
1 (1degree)
0 (0 degree)