Riso V8000 Series, Техническое руководство

Страница: 316 / 362

[17 - 17]
CHAPTER 17. TEST MODE
PAPER FEED/EJECT TEST MODE
No.
462
463
464
No. Display details
470 Displays 10-bit data after A/D conversion.
471 Displays paper width (mm) after adjustment.
472 Multi-paper feed det. A/D values
No.
Description
Setting
Settings:
Default:
Description Adjusts the angle at which (i.e. timing) the paper feed clutch is activated.
Setting
Range:
Units:
Default:
Description
Setting
Range:
Units:
Default:
Description
Setting
Range:
Default:
Description Adjusts the angle at which (i.e. timing) the timing clutch is activated.
Setting
Range:
Units:
Default:
Description Adjusts the angle at which (i.e. timing) the timing clutch is deactivated.
Setting
Range:
Units:
Default:
482
483
486
-150 to +150 (-15.0° to +15.0°)
* (+ delays OFF timing)
1 (0.1°)
0°
-150 to +150 (-15.0° to +15.0°)
* (+ delays ON timing)
Units: 1 (0.1°)
Default: 0°
Paper Feed Clutch OFF Angle/Stnd
Paper Feed Clutch OFF Angle/Card
Adjusts the angle at which (i.e. timing) the paper feed clutch is deactivated according to
paper type setting.
0 (No detection)
1 (Detection)
1 (Detection)
Detect or non-detect selection of the over current while the paper ejection motor activation.
487
485
Selects the paper feed tray stop position (paper feed position). If 0, stop position is linked
to the pressure adjust lever. If 1 or 2, stop position is fixed.
480
0: Linked to the pressure adjust lever; switches the upper limit position to
upper limit sensor A or B.
1: Fixed at the upper limit sensor A position.
2: Fixed at the upper limit sensor B position.
0
481
Elevator Upper Limit Selection
Ejection Motor Overcurrent Det.
-150 to +150 (-15.0° to +15.0°)
* (+ delays ON timing)
1 (0.1°)
0°
Paper Feed Clutch ON Angle
Second Paper Feeding Adjustment
Timing Clutch ON Angle Adjustment
-150 to +150 (-15.0° to +15.0°)
* (+ delays OFF timing)
Units: 1 (0.1°)
Default: 0°
Timing Clutch OFF Angle Adjustment
Instead of feeding the paper manually into the grippers when adjusting the
paper feed cam, this feeds the paper to the angle specified in Test mode No.
492, then pauses the paper feed. Press the Stop or Start key to restart the
paper feed.
Data check
Paper Width A/D Data
Paper Width Metric Data
Multi-Paper Feed Det. A/D Data
Data settings
Unit check
Pinch Roller Compression
Performs pinch roller compression.
Performs pinch roller release.
Pinch Roller Release