Risco LightSYS Plus Скачать руководство пользователя страница 88

Страница: 88 / 100

01/2022

Page 81

5IN2933

Testing Follow-Me Destinations

This tests if notifications sent to Follow-Me destinations (recipients) are received. It is highly
recommended to test every FM destination.

➢

To test a FM destination:

At the keypad, enter your Grand Master code, and then press

OK.

Scroll to

Follow Me

and then press

OK.

Scroll to

Test FM

and then and press

OK.

Scroll to select a FM destination to test, and then press

OK;

FM TEST ACTIVATED

displays and a test message is sent to the selected FM destination.

Performing a Keypad Test

This tests a keypad's indicators.

NOTE:

This test is not relevant for the Slim keypad.

➢

To perform a keypad test:

At the keypad, enter your Grand Master code, and then press

OK.

Scroll to

Maintenance

and then press

OK.

Scroll to

Keypad Test

and then press

OK;

all the keypad's indicators display for a few

seconds.

Performing a Siren Test

This tests a siren's' sounding mechanism.

➢

To perform a siren test:

At the keypad, enter your Grand Master code, and then press

OK.

Scroll to

Maintenance

and then press

OK.

Scroll to

Siren Test

and then select the siren to test.

Press

OK;

the siren sounds.

Press

Exit

to end the siren test.

Содержание LightSYS Plus





































































































Результаты поиска

Содержание LightSYS Plus

Отзывы:

Похожие инструкции для LightSYS Plus

Бренды по названию

Популярные бренды

Risco LightSYS Plus, Руководство пользователя

Результаты поиска

Содержание LightSYS Plus

Отзывы:

Похожие инструкции для LightSYS Plus

Бренды по названию

Популярные бренды