01/2022
Page 9
5IN2933
Initial Setup Tasks for the Grand Master
Before operating the system, the Grand Master (chief system user) must perform some
initial setup tasks. Below is a list of the Grand Master tasks most commonly performed,
shown in a typical order (depending on the system requirements, not all of these tasks may
be necessary):
Step 1: Changing the Default Grand Master Code
Step 2: Registering the System to the RISCO Cloud
Step 3: Logging into the RISCO Cloud / Web User Interface
Step 4: Downloading the iRISCO Smartphone App
Step 5: Working with Keypads and User Menus
Step 6: Defining User Codes and Proximity Tags
Step 7: Defining Follow-Me Destinations
Step 8: Defining Keyfobs for Output (Gate) Control
Step 9: Performing a Monitoring Station Test
Step 10: Performing a Wi-Fi Scan
Step 11: Training System Users
Who Can / Can't Perform the Procedures?
Although this chapter is intended for the Grand Master, some of the procedures can also be
performed by the installer and other system users
–
whether at initial setup, or during
regular system operation.
In order to show at-a-glance who can/can't perform the procedure, at the start of each
procedure the two most common user authority levels (level of permissions) are indicated
–
Grand Master
and
User,
as well as the
Installer/Technician.
Their respective icons are as
follows, and if an icon is not listed, it means that person does not have permission to
perform the procedure:
•
Grand Master:
•
User:
•
Installer/Technician:
NOTE:
For installer/technician-indicated procedures, although they can perform the
procedures (locally at the premises or remotely via Configuration Software), the procedures
in this manual are specifically for Grand Master and system users.
For a detailed description of all user authority levels and their respective permissions, see
Содержание LightSYS Plus
Страница 1: ...LightSYS Plus User Manual ...
