manualshive.com logo in svg

Rinnai ENERGYSAVER RHFE-308FTR, Руководство по установке, Страница: 2 / 32

Поделиться
Скачать
Rinnai ENERGYSAVER RHFE-308FTR Скачать руководство пользователя страница 2

Rinnai  2 ES_FIM

IMPORTANT

Before proceeding with an installation read this manual thoroughly and gain a full understanding 

of the installation requirements, to ensure a safe and correct installation.

The  Rinnai  Energysaver®  Co-Axial  flue  is  certified  as  part  of  the  Rinnai  Energysaver  space 

heaters that have the designation ‘RHFE’ in the model number.

ONLY

 the Rinnai flue system components specified in this manual 

MUST

 be used. Components 

NOT

 specified in this manual, whether manufactured by Rinnai or otherwise, are 

NOT

 compatible 

and 

MUST NOT

 be used!

Rinnai appliance warranty conditions may be voided if non Rinnai flue components are fitted.

ONLY

 an authorised person 

MUST

 install, service and remove the Rinnai Energysaver® space 

heater & flue system.

This appliance must be installed in accordance with:
• Manufacturer’s Installation Instructions
• Current AS/NZS 3000, AS/NZS 3500 & AS/NZS 5601
• Local Regulations and Municipal Building Codes

including local OH&S requirements

This appliance must be installed, maintained and removed 

by an Authorised Person.
For continued safety of this appliance it must be installed 

and maintained in accordance with the manufacturer’s 

instructions.

Содержание ENERGYSAVER RHFE-308FTR

































Отзывы:

Нет отзывов