Rigol VS5000 Series Скачать руководство пользователя страница 144

Страница: 144 / 148

RIGOL

User’s Guide for VS5000 Series

6-2

Appendix B: Warranty

RIGOL

Technologies, Inc. warrants the mainframe and accessories of this produce

will be free from defects in materials and techniques within the warranty period.
During the period concerned,

RIGOL

guarantees to repair or replace products

which are approved defective without charge.

To get maintenance or ask for a copy of the whole warranty statement, please
contact with your nearest

RIGOL

sales and service office.

RIGOL

does not provide any other warranty items except the one being provided by

this summary and the warranty statement. The warranty items include but not being
limited to the hinted guarantee items related to tradable characteristic and any
particular purpose.

RIGOL

will not take any responsibility in cases regarding to indirect, particular and

ensuing damages.

Содержание VS5000 Series




















































































































































Результаты поиска

Содержание VS5000 Series

Отзывы:

Rigol VS5000 Series, Руководство пользователя, Страница: 144 / 148

Результаты поиска

Содержание VS5000 Series

Отзывы: