Rigol VS5000 Series, Руководство пользователя, Страница: 104 / 148

© 2008 RIGOL Technologies, Inc
User’s Guide for VS5000 Series
2-72
Please do as the following steps:
1) Select the Track Cursor mode for cursor measurement; click the buttons as
follows: Analyze
Æ
Cursor
Æ
Track Cursor.
2) Select channel Source for measurements; click the buttons as follows:
Source
Æ
CH1 or CH2.
3) Move the cursors to adjust the increment between the cursors: (Details in the
following Table)
Table 2-33 Definition of the Track Cursor
Cursor Operation
A (cursor A) Click the
button to adjust the cursor A
horizontally.
B (cursor B)
Click the button to adjust the cursor B
horizontally.
NOTE:
Moving cursor horizontally is not allowed when other (not tracking cursor)
menu is activated.
4) To get measurement values:
z
Position of Cursor 1 (Time cursor centered on the midpoint of screen; Voltage
cursor centered on channel ground level).
z
Position of Cursor 2 (Time cursor centered on the midpoint of screen; Voltage
cursor centered on channel ground level).
z
Horizontal space between cursor 1 and 2 (
△
X): Time between cursors, units in
Second, (1/
△
X), units in Hz, kHz, MHz, GHz.
z
Vertical space between cursor 1 and 2 (
△
Y): Voltage between cursors, units in
V.
NOTE:
Cursor A and B can be dragged on screen.