Riello RLS 310/E MX, Инструкции по установке, использованию и обслуживанию

Страница: 40 / 96

20081825
38 GB
Start-up, calibration and operation of the burner
6.7 Change of fuel
There are two change of fuel options:
1
with selector 27)(Fig. 6 on page 16);
2 with a remote selector connected to the main terminal
board.
Positioning the selector 27)(Fig. 6 on page 16) to “
EXT ” acti-
vates the remote selection of the fuel. In this position, if
there is no remote selector, the display shows the priority
fuel, but does not start. In the passage between the two
fuels, the following is displayed: “FUEL CHG” Fig. 38 on
page 38.
The display shows when operating with:
gas “OFF GAS1” Fig. 37 on page 38;
light oil “OFF GASO” Fig. 36 on page 38.
P
h V min s %
20095643
Fig. 36
P
h V min s %
Fig. 37
20095655
P
h V min s %
Fig. 38
20095656