Riello RLS 310/E MX, Инструкции по установке, использованию и обслуживанию

Страница: 36 / 96

20081825
34 GB
Installation
5.13.4 Gas pressure
Tab. O on page 34 indicates the minimum pressure drops along
the gas supply line, depending on the maximum burner output.
The values shown in Tab. O on page 34 refer to:
–
Natural gas G 20 NCV 9.45 kWh/Sm
3
(8.2 Mcal/Sm
3
)
– Natural gas G 25 NCV 8.13 kWh/Sm
3
(7.0 Mcal/Sm
3
)
Column 1
Combustion head pressure drop.
Gas pressure measured at the test point P1)(Fig. 32 on page 33),
with:
•
Combustion chamber at 0 mbar;
• Burner working at maximum output;
• Combustion head adjusted as in page 27.
Column 2
Pressure loss at gas butterfly valve 14)(Fig. 5 on page 15) with
maximum opening: 90°.
Calculate the approximate maximum output of the burner in this
way:
–
subtract the combustion chamber pressure from the gas
pressure measured at test point P1)(Fig. 32 on page 33).
– Find, in the table Tab. O on page 34 related to the burner con-
cerned, the pressure value closest to the result of the sub-
traction.
– Read the corresponding output on the left.
Example RLS 410/E MX with natural gas G20:
Maximum output operation
Gas pressure at test point P1)(Fig. 32 on page 33) = 29,4 mbar
Pressure in combustion chamber
= 5 mbar
29.4 - 5 = 24.4 mbar
A pressure of 24.4 mbar, column 1, corresponds in the table Tab.
O on page 34 to an output of 3000 kW.
This value serves as a rough guide; the effective output must be
measured at the gas meter.
To calculate the required gas pressure at test point P1)(Fig. 32
on page 33), set the MAX output required from the burner opera-
tion:
–
find the nearest output value in the table Tab. O on page 34
for the burner in question.
– Read, on the right (column 1), the pressure at the test point
P1)(Fig. 32 on page 33).
– Add this value to the estimated pressure in the combustion
chamber.
Example RLS 410/E MX with natural gas G20:
Required burner maximum output operation: 3000 kW
Gas pressure at an output of 3000 kW
= 24.4 mbar
Pressure in combustion chamber = 5 mbar
24.4 + 5 = 29.4 mbar
Pressure required at test point P1)(Fig. 32 on page 33). Tab. O
kW
1

p (mbar) 2

p (mbar)
G 20 G 25 G 20 G 25
RL
S 310/E MX
1200 3.6 5.4 0.1 0.1
1467 5.4 8.1 0.2 0.3
1733 7.5 11.2 0.4 0.6
2000 9.9 14.8 0.7 1.0
2267 12.7 18.9 1.0 1.5
2533 15.8 23.6 1.3 1.9
2800 19.3 28.8 1.7 2.5
3067 23.1 34.5 2.1 3.1
3333 27.3 40.7 2.6 3.9
3600 31.8 47.4 3.1 4.6
RLS 4
10/E MX
1500
6.4 9.5 0 0
1800
9.0 13.4 0.2 0.3
2100
12.2 18.2 0.5 0.7
2400
15.8 23.6 0.8 1.2
2700
19.9 29.7 1.2 1.8
3000
24.4 36.4 1.7 2.5
3300
29.4 43.9 2.3 3.4
3600
34.9 52.1 2.9 4.3
3900
40.9 61.0 3.6 5.4
4200
47.3 70.6 4.4 6.6
RL
S
5
10/E MX
1800
7.0 10.4 1.5 2.2
2174
9.8 14.6 2.0 3.0
2549
13.0 19.4 2.6 3.9
2923
16.6 24.8 3.3 4.9
3298
20.7 30.9 4.1 6.1
3672
25.2 37.6 4.9 7.3
4047
30.2 45.1 5.8 8.7
4421
35.6 53.1 6.8 10.1
4796
41.5 61.9 7.8 11.6
5170
47.8 71.3 9.0 13.4
RL
S
610/E
MX
2200
8.7 13.0 2.7 4.0
2639
12.5 18.6 3.9 5.8
3079
17.1 25.5 5.3 7.9
3518
22.3 33.3 6.9 10.3
3958
28.2 42.1 8.7 13.0
4397
34.8 51.9 10.7 16.0
4837
42.1 62.8 13.0 19.4
5276
50.1 74.7 15.4 23.0
5716
58.8 87.7 18.1 27.0
6155
68.2 101.8 21.0 31.3