124
ENGLISH
10.5.8 HOLIDAY AWAY SETTING
The HOLIDAY AWAY SETTING is used to set the outlet water tempe-
rature to prevent freezing when away for holiday.
Go to MENU> FOR SERVICEMAN> 8.HOLIDAY AWAY
SETTING. Press OK. The following page will be displayed:
20°C
20°C
8 HOLIDAY AWAY SETTING
8.1 T1S_H.A._H
8.2 T5S_H.A._DHW
ADJUST
10.5.9 SERVICE CALL SETTING
The installers can set the phone number of the local dealer in 9.SERVI-
CE CALL SETTING. If the unit doesn’t work properly, call this number
for help.
Go to MENU> FOR SERVICEMAN>SERVICE CALL. Press OK.
The following page will be displayed:
ADJUST
OK
CONFIRM
9 SERVICE CALL SETTING
PHONE NO. ******************
MOBILE NO. ******************
Press ▼ ▲ to scroll and set the phone number. The maximum length
of the phone number is 13 digits, if the length of phone number is short
than 12, please input ■, as shown below:
ADJUST
OK
CONFIRM
9 SERVICE CALL
PHONE NO. ***************
MOBILE NO. ******************
The number displayed on the user interface is the phone number of
your local dealer.
10.5.10 RESTORE FACTORY SETTINGS
The RESTORE FACTORY SETTING is used to restore all the parame-
ters set in the user interface to the factory setting.
Go to MENU> FOR SERVICEMAN> 10.RESTORE FACTORY SET-
TINGS. Press OK. The following page will be displayed:
10 RESTORE FACTORY SETTINGS
All the settings will come back to
factory default.
Do you want to restore factory
settings?
OK
CONFIRM
NO
YES
Press
▼
▼ to scroll the cursor to YES and press OK. The following
page will be displayed:
Please wait…
5%
10 RESTORE FACTORY SETTINGS
After a few seconds, all the parameters set in the user
interface will be restored to factory settings.
10.5.11 TEST RUN
TEST RUN is used to check correct operation of the valves, air
purge, circulation pump operation, cooling, heating and domestic wa-
ter heating.
Go to MENU> FOR SERVICEMAN> 11.TEST RUN. Press OK. The
following page will be displayed:
11 TEST RUN
Active the settings and
active the “TEST RUN”?
OK
CONFIRM
NO
YES
If YES is selected, the following pages will be displayed
OK
ENTER
11 TEST RUN
11.1 POINT CHECK
11.2 AIR PURGE
11.3 CIRCULATED PUMP RUNNING
11.4 COOL MODE RUNNING
11.5 HEAT MODE RUNNING
OK
ENTER
11 TEST RUN
11.6 DHW MODE RUNNING
If POINT CHECK is selected, the following pages will be displayed:
11 TEST RUN
OFF
OFF
OFF
OFF
OFF
ON/OFF
ON/OFF
3-WAY VALVE 1
3-WAY VALVE 2
PUMP I
PUMP O
PUMP C
1/2
11 TEST RUN
OFF
OFF
OFF
OFF
OFF
ON/OFF
ON/OFF
PUMPSOLAR
PUMPDHW
INNER BACKUP HEATER
TANK HEATER
3-WAY VALVE 3
2/2
Press ▼ ▲ to scroll to the component
s you want to check and press
Содержание 20191845
Страница 72: ...74 ITALIANO ...
