Riello 20191845, Руководство пользователя

Страница: 121 / 143

123
ENGLISH
10.5.5 TEMP. TYPE SETTING
About TEMP. TYPE SETTING
The TEMP. TYPE SETTING is used for selecting whether water flow
temperature or room temperature is used control the ON/OFF of the
heat pump.
When ROOM TEMP. is enabled, the target water temperature will be
calculated from climate-related curves.
How to enter the TEMP. TYPE SETTING
Go to MENU> FOR SERVICEMAN> 5.TEMP. TYPE SETTING.
Press O K. The following page will be displayed:
NON
NON
YES
5 TEMP. TYPE SETTING
5.1 WATER FLOW TEMP.
5.2 ROOM TEMP.
5.3 DOUBLE ZONE
ADJUST
If you only set WATER FLOW TEMP. to YES, or only set ROOM TEMP.
to YES, The following pages will be displayed.
only WATER FLOW TEMP. YES only ROOM TEMP. YES
If you set WATER FLOW TEMP. and ROOM TEMP. to YES, meanwhi-
le set DOUBLE ZONE to NON or YES, the following pages will be
displayed.
Homepage (zone 1)
2
Addition page (zone 2)
(Double zone is effective)
◄
◄
In this case, the setting valve of zone 1 is T1S, the setting valve of
zone 2 is T1S2 (the corresponding TIS2 is calculated according to the
climate related curves).
If you set DOUBLE ZONE to YES and set ROOM TEMP. to NON,
meanwhile set WATER FLOW TEMP. to YES or NON, the following
pages will be displayed.
Homepage (zone 1) Addition page (zone 2)
2
◄
◄
In this case, the setting valve of zone 1 is T1S,the setting valve of
zone 2 is T1S2(The corresponding TIS2 is calculated according to the
climate related curves.)
If you set DOUBLE ZONE to YES and set ROOM TEMP. to NON, me-
anwhile set WATER FLOW TEMP. to YES or NON,the following pages
will be displayed.
Homepage (zone 1)
2
Addition page (zone 2)
(Double zone is effective)
◄
◄
In this case, the setting valve of zone 1 is T1S, the setting valve of
zone 2 is T1S2 (the corresponding TIS2 is calculated according to the
climate related curves).
10.5.6 ROOM THERMOSTAT
About ROOM THERMOSTAT.
The ROOM THERMOSTAT is used to set whether the room thermostat
is available.
How to set the ROOM THERMOSTAT.
Go to MENU> FOR SERVICEMAN> 6.ROOM THERMOSTAT.
Press OK. The following pag e will be displayed:
NON
6 ROOM THERMOSTAT
6.1 ROOM THERMOSTAT
ADJUST
NOTE
ROOM THERMOSTAT = NON, no room thermostat.
ROOM THERMOSTAT = MODE SET, the wiring of room thermostat
should follow method A.
ROOM THERMOSTAT=ONE ZONE, the wiring of room thermostat
should follow method B.
ROOM THERMOSTAT=DOUBLE ZONE, the wiring of room thermo-
stat should follow method C (refer to 9.7.6 "Connection for other com -
ponents/For room thermostat").
10.5.7 Other HEATING SOURCE
The OTHER HEATING SOURCE is used to set the parameters of the
backup heater, additional heating sources and solar energy kit.
Go to MENU> FOR SERVICEMAN> 7.OTHER HEATING
SOURCE, Press OK. The following page will be dispayed:
30MIN
-5°C
5°C
30MIN
5°C
7 OTHER HEATING SOURCE
7.1 dT1_IBH_ON
7.2 t_IBH_DELAY
7.3 T4_IBH_ON
7.4 dT1_AHS_ON
7.5 t_AHS_DELAY
ADJUST
1/2
-5 °C
7 OTHER HEATING SOURCE
7.6 T4_AHS_ON
7.7 IBH LOCATE PIPE LOOP
7.8 P_IBH1
7.9 P_IBH2
7.10 P_TBH
ADJUST
2/2
0.0kW
0.0kW
2.0kW