MAINTENANCE
S-SERIES PRIVATE USE SERVICE MANUAL
SEPTEMBER 2020
3- 14
32DSW02.F
FIGURE 3-28
7. Refer to
Figures 3-29
. Remove screw, nut and three plastic washers to detach stow-lock latch from
knuckle arm assembly. Retain attaching hardware for installation.
FIGURE 3-29
8. Replace stow-lock latch with (P/N 39943) provided in Kit (P/N 42054).
9. Re-assembly in reverse order.
NOTE:
When re-assembling new stow-lock and attaching to knuckle arm assembly, add medium strength thread
lock (Loctite 243) to screw.
NOTE:
Properly discard old or worn stow-lock latch.
10. Refer to
Figures 3-30 and 3-31
. Remove center access panel at rear of baseplate.
FIGURE 3-30
FIGURE 3-31
11. Refer to
Figure 3-32
. Disconnect solenoid connector.
12. Refer to
Figure 3-33
. Remove screw and nut to detach manual release handle from stow-lock assembly
and retain hardware.
SCREWS (2)
