MAINTENANCE
S-SERIES PRIVATE USE SERVICE MANUAL
SEPTEMBER 2020
3- 6
32DSW02.F
E. TOWER ANCHOR GUIDE REPLACEMENT
Note:
Tower Anchor Guide and Baseplate Gas Spring replacement may be completed consecutively. Reference
notes when consecutive procedure may be completed.
1. Refer to
Figure 3-4
. Deploy platform to ground level. Remove short side ramp and longer rear ramp from
around the baseplate to gain access to lower tower components.
FIGURE 3-4
2. Refer to
Figures 3-5 and 3-6
. Remove center access panel at rear of baseplate.
FIGURE 3-5
FIGURE 3-6
3. Refer to
Figure 3-7
. Remove two of the mounting bolts attaching the baseplate to the vehicle.
FIGURE 3-7
4. Refer to
Figure 3-8
. Partially stow lift and insert a 6” x 2” x 2” wooden block (or similar) behind gas spring.
This will compress gas spring and decrease tension on cable.
SCREWS (2)
