MAINTENANCE
S-SERIES PRIVATE USE SERVICE MANUAL
SEPTEMBER 2020
3- 12
32DSW02.F
RSM0006701
MAIN ROLLER ASSEMBLY
SLIDING TOWER
PIN RETAINMENT
WELDMENT
1/4-20 X 5/8” SCREW
FIGURE 3-22
3. Refer to
Figure 3-23
. Pry up on front rail to remove lift weight on roller. Push pin bushings and sleeve
out.
FIGURE 3-23
4. Remove roller assembly and replace with Roller Kit (P/N 34574).
5. Refer to
Figure 3-22
. Align new roller assembly in sliding tower then slide pin retainment weldment
through sliding tower and roller assembly.
6. Install 1/4-20 X 5/8” screw to secure pin retainment weldment.
7. Stow and deploy lift to ensure that sliding tower is working properly.
H. STOW-LOCK LATCH REPLACEMENT
1. Deploy platform to vehicle floor level.
2. Remove left side pinch point shields.
3. Refer to
Figure 3-24
. Remove nut and bolt to detach left hand armrest from knuckle arm assembly.
LIFT HERE
