Ricoh SH-P1 M020, Руководство по обслуживанию на месте

Страница: 197 / 312

5860 007 POP before SMTP
Enable/disable POP before SMTP. If the SMTP server
does not have authentication, you can enable POP
before SMTP, them POP authentication is available
(SP 5860 013)
[0 to 1 / 0 / 1]
0: Disable
1: Enable
5860 008 POPtoSMTP Waiting
When using POP before SMTP, this SP mode
determines the maximum wait time between POP
authentication and connection with SMTP.
Communication stops if this time is exceeded.
[0 to 10000 / 300 / -]
5860 009 Mail Receive Protocol
Selects the protocol for the mail reception.
[1 to 3 / 1 / 1]
1: POP3
2: IMAP4
3: SMTP
5860 013 POP3/IMAP4 Auth.
If POP before SMTP is enabled, then you can use this
SP to enable or disable encryption mode for POP
authentication
[0 to 2 / 0 / 1]
0: Auto
1: Off
2: On
5860 014 POP3 Srvr Port No Input the POP server port number.
5860 015 IMAP4 Srvr Port…
Input the IMAP4 server port number.
[1 to 65535 / 143 / 1]
5860 016 SMTP Rx Port No
Input the SMTP port for the mail reception.
[1 to 65535 / 25 / 1]
5860 017 Mail Rx Interval Specifies the interval for the mail reception.
Engine Service Mode
195
5