Ricoh SH-P1 M020, Руководство по обслуживанию на месте

Страница: 175 / 312

5816 068
Cer Abnml Cause
Displays a number code that describes the reason for
the request for update of the certification.
0 Normal. There is no request for certification update in progress.
1
Request for certification update in progress. The current certification has
expired.
2
An SSL error notification has been issued. Issued after the certification has
expired.
3 Notification of shift from a common authentication to an individual certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
5816 069 Cer Updt ReqID The ID of the request for certification.
5816 083 Firm Updating Displays the status of the firmware update.
5816 085 Firm UpUsr Conf
This SP setting determines if the operator can confirm
the previous version of the firmware before the
firmware update execution. If the option to confirm the
previous version is selected, a notification is sent to the
system manager and the firmware update is done with
the firmware files from the URL.
5816 086 Firmware Size
Allows the service technician to confirm the size of the
firmware data files during the firmware update
execution.
5816 087 CERT: MacroVsn
Displays the macro version of the @Remote
certification.
5816 088 CERT: PAC Vsn Displays the PAC version of the @Remote certification.
5816 089 CERT: ID2 Code
Displays ID2 for the @Remote certification. Spaces are
displayed as underscores (_). Asteriskes (***)
indicate that no @Remote certification exists.
5816 090 CERT: Subject
Displays the common name of the @Remote
certification subject. CN = the following 17 bytes.
Spaces are displayed as underscores (_). Asterisks
(***) indicate that no DESS exists.
Engine Service Mode
173
5