Ricoh SH-P1 M020, Руководство по обслуживанию на месте

Страница: 136 / 312

bit 3 [PS] PS Criteria Pattern3 Pattern1
Change the number of PS criterion used by the PS interpreter to determine whether a
job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4 Increase max number of the stored jobs to 1000
jobs. Disable
(100)
Enable (1000)
Enable: Changes the maximum number of jobs that can be stored on the HDD via
Job Type settings to 1000. The default is 100.
bit 5 Face-up output Disable Enable
Enable: All print jobs will be output face-up in the destination tray.
bit 6 Method for determining the image rotation for the
edge to bind on.
0: Disable 1: Enable
If enabled, the image rotation will be performed as in the specifications of older
models for the binding of pages of mixed orientation jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS:Pre-05S models
bit 7
Letterhead mode printing 0: Disable
1: Enable
(Duplex)
1001 Bit Switch
006 Bit Switch 6 DFU - -
1001 Bit Switch
007 Bit Switch 7 0 1
bit 0
Print path 0: Disable 1: Enable
If enabled, simplex pages (in mixed simplex/duplex PS/PCL5 jobs only) and the last
page of an odd paged duplex job (PS, PCL5, PCL6), are always routed through the
duplex unit. Not having to switch paper paths increases the print speed slightly.
5. System Maintenance Reference
134
5