Ricoh SH-P1 M020, Руководство по обслуживанию на месте

Страница: 147 / 312

1159 001 SC Detection
Disables or enables the consecutive jam error for the
fusing unit.
[0 to 1 / 0 / 1]
When set to "1" (on), this SC code is issued after the
3rd consecutive jam in the fusing unit.
1902 OHP Clutch Rotate OHP Clutch Rotations
1902 001 OHP Clutch Rotate
Selects the number of rotations for the bypass feed
roller when the paper type is set for "Transparencies".
Change this setting to "2" if jams occur frequently
when feeding transparencies from the bypass tray.
[1 to 2 / 1 / 1]
1 = 1 rotation, 2 = 2 rotations
1953 Switch FAN Ctrl. DFU -
1953 001 Main FAN [0 to 1 / 1 / 1]
SP2-xxx: Drum
2001 Charge Voltage DFU Charge Roller Bias setting
2001 001 Charge Voltage
Adjusts the voltage applied to the charge roller for
printing.
[1000 to 2000 / 1550 /1 V]
2103 Erase Mag Adjust
Adjust the erase margin by deleting image data at the
margins.
2103 001 Lead Edge Width [0 to 9.9 / 2.0 / 0.1 mm/ step]
2103 002 Trail. Edge Width [0 to 9.9 / 4.0 / 0.1 mm/ step]
2103 003 Left [0 to 9.9 / 2.0 / 0.1 mm/ step]
2103 004 Right [0 to 9.9 / 2.0 / 0.1 mm/ step]
2112 Main-scan Mag. Main Scan Magnification
Engine Service Mode
145
5
RTB 26
SP1953 defined in more detail