Ricoh Lanier AP206 Скачать руководство пользователя страница 76

Страница: 76 / 406

Safety Information

When using your equipment, the following safety precautions should always be
followed.

Safety During Operation

In this manual, the following important symbols are used:

WARNING:

Indicates a potentially hazardous situation which, if instructions are
not followed, could result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation which, if instructions are not fol-
lowed, may result in minor or moderate injury or damage to property.

• Connect the power cord directly into a wall outlet and never use an ex-

tension cord.

• Confirm that the wall outlet is near the machine and freely accessible,

so that in event of an emergency, it can be unplugged easily.

• Disconnect the power plug (by pulling the plug, not the cable) if the

power cable or plug becomes frayed or damaged.

• To avoid hazardous electric shock or laser radiation exposure, do not

remove any covers or screws other than those specified in this man-
ual.

• Turn off the power and disconnect the power plug (by pulling the plug,

not the cable) if any of the following conditions exist:

• You spill something into the equipment.

• You suspect that your equipment needs service or repair.

• Your equipment's cover has been damaged.

• Do not incinerate spilled toner or used toner. Toner dust is flammable

and might ignite when exposed to an open flame.

• Disposal should take place at an authorized dealer or appropriate col-

lection site.

• If you dispose of the used toner containers yourself, dispose of them

according to local regulations.

Содержание Lanier AP206




















































































































































































































































































































































































































Результаты поиска

Содержание Lanier AP206

Отзывы:

Похожие инструкции для Lanier AP206

Бренды по названию

Популярные бренды

Ricoh Lanier AP206, Руководство по установке

Результаты поиска

Содержание Lanier AP206

Отзывы:

Похожие инструкции для Lanier AP206

Бренды по названию

Популярные бренды