Ricoh Lanier AP206, Руководство по установке

Страница: 289 / 406

NetWare 4.x, 5 - Advanced Settings
63
4
N
Assign print queues to the created printer as follows.
A
Click [ Assignments ] , and click [ Add ] in the [ Assignments ] group.
B
In the [ Available objects ] box, click the queue created in step
LLLL
, and click
[ OK ]
.
C
Click [ Configuration ] , and in the [ Printer type ] box, select [ Parallel ] using the
drop-down menu, and then click
[ Communication ]
.
D
Click [ Manual load ] in the [ Communication type ] group, and click [ OK ] .
E
After confirming the settings, click [ OK ] .
O
Create a print server as follows.
A
Select the context specified using the NIB Setup Tool (step
IIII
-
A A A A
), and on
the [ Object ] menu, click [ Create ] .
B
In the [ Class of new object ] box, click “Print Server”, and click [ OK ] . When
you are using NetWare 5, click “Print Server (Non NDPS)”.
C
In the [ Print Server name ] box, type the name of the print server.
Important
❒
Use the same name as that specified using the NIB Setup Tool. (Step
H
)
D
Click
[ Define additional properties ]
to check a box, and click
[ Create ]
.
P
Assign the printer to the created print server as follows.
A
Click [ Assignments ] , and click [ Add ] in the [ Assignments ] group.
B
In the [ Available objects ] box, click the printer created in step
MMMM
, and click
[ OK ] .
C
After confirming the settings, click [ OK ] .
Q
Turn the printer power off and on.
Note
❒
If the printer works as configured, the name of the print server appears as
an attached user.
Using Pure IP in the NetWare 5 environment
A
Log on to the file server as an Admin or an Admin equivalent.
B
Run the NIB Setup Tool.
Reference
⇒
P.50 “Running the NIB Setup Tool”
C
Click [ Property Sheet ] and click [ OK ] .
The [ Network board list ] dialog box appears.