Ricoh Lanier AP206, Руководство по установке

Страница: 399 / 406

Printing Method
11
1
Printing with rsh, rcp, ftp
You can also print using the rsh, rcp and ftp commands.
Note
❒
Print using the format that the printer can support.
❒
The message “print session full” appears when the maximum number of
print requests has been reached (max. 5 sessions). You should try to print
again when the number of requests becomes less than five. You can confirm
the number of print requests using telnet. For more information about using
telnet, see Network Interface Board Operating Instructions provided as a PDF
file on the CD-ROM labeled “Printer Drivers and Utilities”.
rsh
% rsh host_name print < file_name [file_name...]
For example:
host name is nphost, file names are file1 and file2
% rsh nphost print < file1 file2
Note
❒
” host_name ” is the name entered when executing the installation shell script.
❒
If you use a HP-UX, use the remsh command instead of rsh.
rcp
❖
❖ ❖
❖
To specify the file and print it
% rcp file_name [file_name...] host_name:
For example:
host name is nphost, file names are file1 and file2
% rcp file1 file2 nphost:
❖ ❖ ❖ ❖
To print all of the files in a directory
% rcp -r directory_name host_name:
For example:
host name is nphost, directory name is directory1
% rcp -r directory1 nphost:
Note
❒
” host_name ” is the name entered when executing the installation shell script.
❒
You can use wild cards ( * or ? ) for the file name.