Ricoh Lanier AP206, Руководство по установке

Страница: 332 / 406

Appendix
106
6
D
Enter your user name and password, and then click [ OK ] .
To use the factory default account, enter no user name and type "password"
for the password.
E
Click [ TCP/IP ] .
F
Set [ WINS ] to active and enter the IP address of the WINS server in [ Primary
WINS Server ] and [ Secondary WINS Server ] .
G
Click [ Refresh ] .
H
Exit the Web browser.
I
Restart the printer.
Using telnet
A
Connect to the remote printer using telnet.
B
Use the "set" command to make WINS active.
msh> set wins on
C
Specify the IP addresses (primary and secondary) using the following com-
mands.
msh> wins primary IPaddress
msh> wins secondary IPaddress
Note
❒
To confirm the current configuration, use the "show" command.
D
Log out from telnet.
E
Restart the printer.
Using DHCP
You can use the printer under a DHCP environment. You can also register the
printer NetBIOS name on a WINS server when it is running.
Note
❒
Printers that register their NetBIOS name on a WINS server must be config-
ured for the WINS server.
❒
Supported DHCP server is Windows NT 4.0 Server Service Pack 4 or later,
Windows 2000 Server and NetWare 5.
❒
If you do not use WINS server, reserve printer's IP address in DHCP server
so that the same IP address is assigned every time.