Ricoh Kr-P2, Руководство по обслуживанию на месте

Страница: 129 / 200

1911
Curl Control Curl Reduction
Thin paper has a tendency to jam or wrinkle, especially during duplex printing. When
this SP code is switched on:
• The machine ignores the fusing temperature set for SP1105.
• When the machine is powered on or recovers from the low power mode the machine
requires about 20 sec. to warm up (this is longer than normal).
[0 or 1 / 0 / -]
0: No (Normal)
1: Yes (Curl Control)
1913
SC559 Detect Fusing Jam SC Setting
This SP setting determines whether SC559 is issued after three paper late jams occur in
the fusing unit. After this SP code is turned on, a counter monitors the number of paper
late jams that occur in the fusing unit. After the 3rd occurrence of a fusing jam, SC559 is
issued and the machine cannot be used until the service technician releases the error.
Note: Switching the machine off/on does not reset this jam counter. The counter is reset
after the cause of the jam has been removed and a sheet of paper successfully passes
the fusing exit sensor.
[0 to 1 / 0 / 1]
0: No
1: Yes
1914 Nip Measure (Fusing Nip Width Measurement)
1914 001
Measure Exe. - -
Performs the nip width measurement. This is for by-pass tray and used OHP type.
1915
Envelope Flap
JPN use only
SP2-xxx: Drum
2001
Charge Rol Bias
Adjusts the voltage applied to the charge roller for printing.
SP Tables
31
3