Ricoh Kr-P2, Руководство по обслуживанию на месте

Страница: 123 / 200

bit 6
PDL Auto Detection timeout of jobs submitted via
USB or Parallel Port (IEEE 1284).
0: Disable
(Immediately)
1: Enable
(10 seconds)
To be used if PDL auto-detection fails. A failure of PDL autodetection doesn't necessarily
mean that the job can't be printed. This bit switch tells the device whether to time-out
immediately (default) upon failure or to wait 10 seconds.
bit 7 DFU - -
1001 Bit Switch
007 Bit Switch 7 0 1
bit 0
Print path 0: Disable 1: Enable
If enabled, simplex pages (in mixed simplex/duplex PS/PCL5 jobs only) and the last
page of an odd paged duplex job (PS, PCL5, PCL6), are always routed through the
duplex unit. Not having to switch paper paths increases the print speed slightly.
bit 1
to 7
DFU - -
1001 Bit Switch
008 Bit Switch 8 DFU - -
1003 Clear Setting
001 Init. System Initializes settings in the System menu of the user mode.
003 Delete Program DFU
1004 Print Summary
001
Service Summary
Touch [Execute] to print the printer summary sheets.
1005 Display Version.
Printer Version
Displays the version of the controller firmware.
SP Tables
25
3
Switch 6-7
RTB 13