Ricoh IM C2000 Series Скачать руководство пользователя страница 95 | Manualshive

Страница: 95 / 396

Ricoh IM C2000 Series Скачать руководство пользователя страница 95

4.

Press [Destinations] tab [Fax].

DZC135

5.

Specify the Fax Destinations and send conditions.

• Select Line: Select the line to use.
• International Transmission Mode: Specify whether to reduce errors occurring when sending

abroad.

• Fax Header: Select the name of the sender printed on the reception sheet of the destination.

Register the fax header in advance.
See "Printing the Destination Name, Fax Header, and Standard Message on the Fax
Received at the Destination", User Guide (Full Version).

• Label Insertion: Specify the name (title + name) and fixed phrase printed on the reception

sheet of the destination.
See "Printing the Destination Name, Fax Header, and Standard Message on the Fax
Received at the Destination", User Guide (Full Version).

6.

Press the [User Management / Others] tab, and specify the required settings.

DZC131

Registering Fax Numbers in the Address Book

93

«
...
93
94
95
96
97
...
»

Содержание IM C2000 Series













































































































































































































































































































































































































Отзывы:

Нет отзывов