Ricoh IM C2000 Series Скачать руководство пользователя страница 60

Страница: 60 / 396

Placing an Original on the Exposure Glass

Use the exposure glass to scan originals that cannot be placed in the auto document feeder (ADF), such
as books and license cards.

• When lowering the ADF, do not place your hands on the hinges and exposure glass. Your

hands or fingers are caught, which can result in injury.

• Do not lift the ADF forcefully. The cover of the ADF might open and cause injury. The ADF, or its

hinges may also become damaged.

Lift the ADF.

Lift the ADF by more than 30 degrees to detect the document size automatically when placing an
original on the exposure glass.

Place the original face down and aligned to the mark on the upper left corner of the scan
area.

DZW102

page 212 "Recommended Original Size and Weight"
page 214 "Sizes Detectable with Auto Paper Select"

Lower the ADF.

• When you place a thick book or three-dimensional original on the exposure glass and lower the

ADF, the back side of the ADF rises up to accommodate the original.

1. Getting Started

Содержание IM C2000 Series













































































































































































































































































































































































































Результаты поиска

Содержание IM C2000 Series

Отзывы:

Ricoh IM C2000 Series, Руководство пользователя, Страница: 60 / 396

Результаты поиска

Содержание IM C2000 Series

Отзывы: