Ricoh IM C2000 Series, Руководство пользователя, Страница: 253 / 396

Message Condition Solution and reference
"Network communication
has failed. The IP address
may be invalid. Please
check the network
settings." The settings in [SIP
Server IP Address] and
[Effective Protocol] do
not match. Check that SIP Server IP Address in [Settings]
[Machine Features Settings] [Fax
Settings] [Initial Settings] tab [SIP
Settings] and [Effective Protocol] on the
[Settings] [Machine Features Settings]
[System Settings] [Interface Settings] tab are
correct.
An invalid IP address is
registered. Specify the correct [Machine IPv4 Address], or
[Machine IPv6 Address] on the [Settings]
[Machine Features Settings] [System
Settings] [Interface Settings] tab.
See "Connecting to a Wired LAN", User
Guide (Full Version).
"Network communication
has failed. The line has
been disconnected.
Please check the
destination and caller ID
notification setting." The destination
terminated the
communication. • Check that the destination is specified
correctly.
• If the destination refuses to receive a fax
with no sender information, enable
notifying of the information and send the
fax again.
"Network communication
has failed. The mail
address for
authentication does not
match with
administrator's one.
Please check the
settings." When a signature is
specified, the SMTP
authentication e-mail
address or POP before
SMTP authentication e-
mail address does not
match the administrator
e-mail address. Check that the authentication e-mail address
matches the address specified in [Settings]
[Machine Features Settings] [System
Settings] [File Transfer] tab
[Administrator's Email Address].
See "Machine Status Notification by E-mail",
User Guide (Full Version).
• Change the current value to [1] under switch number [21] and bit number [6] in [Settings]
[Machine Features Settings] [Fax Settings] [Initial Settings] tab [Parameter Setting] to
disable displaying the "Network communication has failed." message. Change the setting when
you are not using the IP-Fax or Internet Fax function.
• See "Changing the Parameter Settings", User Guide (Full Version).
When a Message Is Displayed While Using the Fax Function
251